**PUBLICATIONS**

**Peer Reviewed Journal Publications:**

1. R.D. Findlay and G. Pandurangan, "A Comparison Between
Two Different Designs of Bare Single-Layer Steel Reinforced Aluminum
Conductor", IEEE PAS-89, No. 7, September 1970, pp. 1470-1470.

2. R.D. Findlay, "Field Distributions in an Inductively Heated
Nonmagnetic Billet of Finite Length", IEEE IGA-6, No. 5,
September, 1970, pp. 497-502.

3. R.D. Findlay and W. Smith, "Circular Grid Solution for
Laplace's Equation in Two Dimensions", Proc. IEEE, Vol. 61,
No. 2, February, 1973, pp. 238-9.

4. R.D. Findlay and H.A. Briggs, "Open Circuit Tooth Ripple
Eddy Current Loss in Smooth Laminated Poles", IEEE PAS-93,
No. 1, January, 1974, pp. 122-9. (See Conference Publications,
item #5.)

5. H. Riaz and R.D. Findlay, "A Field Theoretical Model for
ACSR", CEEJ, Vol. 2, No. 1, January, 1977 (invited paper)
pp. 17-20.

6. R.D. Findlay, "Equivalent Nonlinear Lumped Parameter Network
Representation for ACSR", Proc. IEE, Vol. 127, Part C, No.
6, Nov. 1980, pp. 430-433.

7. R.D. Findlay, "Economic Models for Overhead Transmission
Conductors", Int. Journal of Modelling and Simulation, Vol.
1, No. 3, 1981, pp. 202-206.

8. R.D. Findlay, "An Algorithm for the Determination of Eddy-Current
Losses and Temperatures in a Conductor Subjected to High-Frequency
Magnetic Flux Variations", Proc. IEEE, Vol. 70, No. 11, 1982,
pp. 1368-1370.

9. R.D. Findlay and R. Murray, "Application of the Hybrid
Finite Difference Technique to the Solution of Multistrand Conductor
Problems", IEEE Trans., MAG-19, November, 1983, pp. 2348-2351.(See
conference publications #19)

10. R.D. Findlay and H. Riaz, "The Performance of Conduits
in Grounding Circuits", CEEJ, Vol. 9, No. 1, January, 1984,
pp. 16-21.

11. J.H. Dableh and R.D. Findlay, "An Annotated Summary of
Analysis and Design Techniques for Pipe-Type Cable Systems",
IEEE Trans. Power Apparatus and Systems, Vol. PAS-103, No. 10,
October, 1984, pp. 2786-2793. (See Conference Publications, item
#21)

12. A.A. Jimoh, R.D. Findlay and M. Poloujadoff, "Stray Losses
in Induction Machines: Part I - Definition, Origin and Measurement",
IEEE Trans. Power Apparatus and Systems, Vol. PAS-104, No. 6,
June 1985, pp. 1500-1505. (See Conference Publications, item
#23)

13. A.A. Jimoh, R.D. Findlay and M. Poloujadoff, "Stray Losses
in Induction Machines: Part II - Calculation and Origin",
IEEE Trans. Power Apparatus and Systems, Vol. PAS-104, No. 6,
June 1985, pp. 1506-1512. (See Conference Publications, item
#23)

14. J.H. Dableh, R.D. Findlay, I.L. Colquhoun and M.E. Truemner,
"Cable for High Pulse Power Applications", IEEE Trans.
Power Apparatus and Systems, Vol. PAS-104, No. 8, August, 1985,
pp. 1963-1967. (See Conference Publications, item #25)

15. J.S. Barrett, O. Nigel, C.J. Fehervari and R.D. Findlay, "A
New Model of ACSR Resistance in ACSR Conductors", IEEE Trans.
Power Delivery, Vol. PWRD-1, April 1986, pp. 198-208. (See Conference
Publications, item #28.)

16. I. El-Nahas, B. Szabados, R.D. Findlay, M. Poloujadoff, S.
Lee, P. Burke and D. Perco. "Three Dimensional Flux Calculation
on a Three-Phase Transformer", IEEE Trans., Volume PWRD-1,
July, 1986, pp. 156-160. (See Conference Publications, item #29.)

17. A. Bolopion, M. Poloujadoff and R.D. Findlay, "Models
for Balanced Voltage Operation of Linear Induction Motors",
IEEE Trans., Vol. EC-1, September, 1986, pp. 118-121. (See Conference
Publications, item #26.)

18. M. Poloujadoff and R.D. Findlay, "A Procedure for Illustrating
the Effect of Variation of Parameters on Optimal Transformer Design",
IEEE Trans., Vol. PWRS-1, November, 1986, pp. 202-206. (See Conference
Publications, Item #31.)

19. J.H. Dableh, R.D. Findlay and G.S. Klempner, "Design
and Implementation of Compact, Durable Electromagnetic Pulse Power
Coils for Repositioning of Coolant Tube Spacers in CANDU Nuclear
Reactors", IEEE Trans., Vol. EC-1, December, 1986, pp. 1-8.
(See Conference Publications, Item #30.)

20. E. Tarasiewicz, R.D. Findlay and J.H. Dableh, "The Variational
Treatment of the Diffusion Equation for Vector Field Problems",
IEEE Trans., Vol. Mag-23, July, 1987, pp. 1972-1977.

21. B. Szabados, I. El-Nahas, M.S. El-Sobki, R.D. Findlay and
M. Poloujadoff, "A New Approach to Determine Eddy Current
Losses in the Tank Walls of the Power Transformer", IEEE
Trans., Vol. PWRD-2, July, 1987, pp. 810-816. (See Conference
Publications, item #35.)

22. E. Tarasiewicz, J.H. Dableh and R.D. Findlay, "Accurate
Computation of Axisymmetric Vector Potential Fields with the Finite
Element Method", IEEE Trans., Vol. EC-2, September, 1987,
pp. 321-328. (See Conference Publications, item #34.)

23. I. El-Nahas, B. Szabados, M. Poloujadoff, R.D. Findlay, and
X. Wu, "A Three Dimensional Electromagnetic Field Analysis
Technique Utilizing the Magnetic Charge Concept", IEEE Trans.,
Vol. Mag-23, September, 1987, pp. 3853-3859.

24. A.A. Jimoh and R.D. Findlay, "Parasitic Torques in Saturated
Induction Motors", IEEE Trans., Vol. EC-3, March, 1988, pp.
157-163. (See Conference Publications, item #38.)

25. R.D. Findlay and J.H. Dableh, "Summary of Theoretical
and Experimental Development of a Novel Electromagnetic Technique
for Remote Repositioning of Coolant Tube Spacers in CANDU Nuclear
Reactors", IEEE Trans., Vol. EC-3, June, 1988, pp. 285-291.
(See Conference Publications, item #40.)

26. M.M. Abu-Elnaga, M.A. El-Kady and R.D. Findlay, "Sparse
Formulation of the Transient Energy Function Method for Applications
to Large-Scale Power Systems", IEEE Trans., Vol. PWRS-3,
Nov., 1988, pp. 1649-1654. (See Conference Publications, item
#43.)

27. M.M. Abu-Elnaga, M.A. El-Kady and R.D. Findlay, "Stability
Assessment of Highly Stressed Power Systems Using the Sparse Formulation
of the Direct Method", IEEE Trans., Vol. PWRS-3, Nov., 1988,
pp. 1655-1662. (See Conference Proceedings, item #44.)

28. M.M. Abu-Elnaga, M.A.El-Kady and R.D. Findlay, "Incorporation
of load models in the Direct Method of Power System Transient
Stability", Proc. IEE, Vol. 135, part C, No. 6, Nov. 1988,
pp. 474-479.

29. Findlay R.D., Jimoh A.A., Belmans R., Theoretical and experimental
analysis of the steady state operation and the losses in a squirrel
cage induction motor, Archiv f r Elektro-technik, Vol.72, 1989;
pp. 369-376.

30. J.H. Dableh, R.D. Findlay, R.T.H. Alden and B. Szabados, "A
Novel Electromagnetic Field Shaper for Pipe-Type Cable Systems",
IEEE Trans. on Power Delivery, Vol. 5, N. 1, Jan., 1990, pp. 1-7.
(See Conference Publications, item #48.)

31. B. Szabados, M. Poloujadoff, R.D. Findlay, I. El-Nahas, S.
Spencer, R.T.H. Alden and P. Birke, "Complete Three Dimensional
Analysis of the Leakage Flux Densities in a Transformer",
Electrotechnische Zeitschrift (ETZ Archiv.), Vol. 12, 1990, 8
pages.

32. R. Belmans, R.D. Findlay, D. Verdyck and W. Geysen, "A
Modern Approach to Electrical Machine Design", Jour. of Eng.
Design, Vol. 1, No. 2, 1990.

33. B. Szabados, J.H. Dableh, R.D. Findlay, G.M. Obermeyer and
R.E. Draper, "Measurement of the Torque-Speed Characteristics
of Induction Motors Using a New Digital Approach", IEEE-EC,
Vol. 5, No. 3, pp. 565-571, Sept., 1990. (See Conference Publications,
item #52.)

34. R.D. Findlay, R. Belmans and D. Mayo, "Influence of the
Stacking Method on the Iron Losses in Power Transformer Cores",
IEEE-MAG, Vol. 26, No. 5, pp. 1990-2, Sept., 1990. (See Conference
Publications, item #53.)

35. V.T. Morgan and R.D. Findlay, "The Effect of Frequency
on the Resistance and Internal Inductance of Bare ACSR Conductors",
IEEE-PWRD, Vol. 6, No. 3, July, 1991, pp 1319-1326. (See Conference
Publications, item #55.)

36. R. Belmans, W. Geysen, Ph.K. Sattler and R.D. Findlay, "Comparison
of the Audible Noise Emitted by Inverter-Motor Combinations,"
IEEE-IAS, Vol. 27, No.3, May/June, 1991, pp 539-544. (See Conference
Publications, item #62.)

37. R.Belmans, R.D.Findlay and W.Geysen, "A Circuit Approach
to Finite Element Analysis of a Double Squirrel Cage Induction
Motor," IEEE-EC, Vol. 5, No. 4, 1990, pp 719-724. (See Conference
Publications, item #54.)

38. R. Belmans, D. Verdyck, W. Geysen and R.D. Findlay, "Electro-Mechanical
Analysis of the Audible Noise of an Inverter-Fed Squirrel-Cage
Induction Motor", IEEE Trans. Industry Applications, Vol.
27, No. 3, May/June, 1991, pp 539-544 ( See also Conference Publications,
item #51.)

39. R.Belmans, D.Verdyck, W.Geysen, R.D.Findlay, B.Szabados, S.Spencer,
and S.Lie, "Magnetic Field Analysis in Squirrel Cage Induction
Motors," IEEE Trans on Magnetics, Vol. 28 No. 2, March, 1992,
pp1367-1370. (See Conference Publications, item #64.)

40. R.D.Findlay, B.Szabados, S.Lie, S.Spencer, R.Belmans and M.Poloujadoff,
"Placement of Vents to Reduce Shaft Flux in Two Pole Induction
Motors, with a Comment on Heating Effects," IEEE Trans. Energy
Conversion, Sept., 1992, pp 483-490. (See item 1e below.)

41. V.T.Morgan and R.D.Findlay, "Effects of Axial Tension
and Reduced Air Pressure on the Radial Thermal Conductivity of
a Stranded Conductor," IEEE Trans. Power Delivery, Vol. PWRD
8, No. 2, April 1993, pp 553-558. (See Conference Publications,
item #68.)

42. R.D.Findlay, N.Stranges and D.K.MacKay, "Losses due to
Rotational Flux in Three Phase Induction Motors," IEEE Trans.
on Energy Conversion, Vol. 9, No. 3, Sept., 1994, pp 543-9. (See
conference publications item #73.)

43. J.H.Dymond and R.D.Findlay, "Some Commentary on the Choice
of Rotor Bar Material for Induction Motors," IEEE Transactions
on Energy Conversion, Vol 10, #3, September 1995, pp 425-430.
(See Conference Publications #81.)

44. V.T.Morgan, Bo Zhang and R.D.Findlay, "Effects of Temperature
and Tensile Stress on the Magnetic Properties of a Steel Core
from an ACSR Conductor," IEEE Trans. Power Delivery, Vol
11, No. 4, October, 1996, pp 1907-1913. (See Conference Publications
#82.)

45. V.T.Morgan, Bo Zhang and R.D.Findlay, "Effect of Magnetic
Induction in a Steel-Cored Conductor on Current Distribution,
resistance and Power Loss," IEEE Trans. Power Delivery, Vol
12, No. 3, July, 1997, pp 1299-1308. (See Conference Publications
#83.)

46. Raymond Ong, J.H.Dymond and R.D.Findlay, "A Comparison
of Techniques for Measurement of Shaft Currents in Rotating Machines,"
IEEE Trans. Energy Conversion, Vol. 12, No. 4, December, 1997,
pp 363-367.

47. R.Ong, J.H.Dymond, R.D.Findlay and B.Szabados, "Significance
of Joints Due to Lamination Segmentation on Shaft Currents in
Induction Machines," IEEE Trans. EC, 1999. (IEEE International
Conference on Electric Machines and Drives, 1999, Seattle, Washington.)

48. Raymond Ong, J.H.Dymond, R.D.Findlay and B.Szabados, "Shaft
Current Phenomenon: Experimental Testing and Analysis of a Large
Induction Motor," Vol. 20 #2, 2000, International Journal
of Power and Energy Systems pp75-80.

49. V.T.Morgan, R.D.Findlay and S.E.Derrah, "New Formula
to Calculate the Skin Effect in Isolated Tubular Conductors at
Low Frequencies," IEE Proc. Science, Measurement and Technology,
IEE Proc.-Sci. Meas. Technol. Vol 147, No. 4, July 2000.

50. Nick Stranges and Raymond D.Findlay, "Methods of Predicting
Rotational Flux Distributions in Three Phase Induction Motor Stators,"
IEEE Trans. Magnetics, Vol. 36, # 5, September 2000, pp 3112-3114.
(See also under conferences #100.)

51. Nick Stranges and Raymond D.Findlay, "Measurement of
Rotational Iron Losses in Electrical Sheet," IEEE Trans.
Magnetics, Vol. 36, # 5, September 2000, pp 3457-9. (See also
under conferences #101.)

52. R.Ong, J.H.Dymond and R.D.Findlay, "Bearing Damage Analysis
in a Large, Oil-Ring-Lubricated Induction Motor," IEEE Trans
IE, Vol. 47, No.5, Oct.2000, pp 1085-1091.

53. R.Ong, J.H.Dymond, R.D.Findlay and B.Szabados, "Systematic
Practical Approach to the Study of Bearing Damage in Large Oil
Ring Lubricated Induction Machines," IEEE Transactions on
Industry Applications Journal,Vol. 36, No. 6, November/December,
2000, pp1715-1724.

54. Raymond Ong, J.H.Dymond, Raymond D.Findlay and Barna Szabados,
"Shaft Current in AC Induction Machines - an On-Line Monitoring
System and Prediction Rules," IEEE Trans, IAS Vol 37 #4,
July/August 2001, pp 1189-1196.

55. R. Ong, J.H. Dymond, R.D. Findlay and B. Szabados, "Shaft
Current Phenomenon: Experimental Testing And Analysis of a Large
Induction Motor," (paper 203-2126), International Journal
of Power & Energy systems ISSN 1078-3466 2000, vol. 20, no2,
pp. 75-80.

56. D.Brocilo, J.S.Chang and R.D.Findlay, "Modelling of Two-Stage
Electrostatic Precipitators for Fine Particle Removal,"
Journal of Aerosol Science, Vol. 32, Supplement 1, September 2001,
pp S893-4, Pergamon Press, ISSN 0021-8502 (See under Conference
Publications #111. )

57. N. Al-Mutawaly, H. de Bruin, R.D. Findlay "Magnetic nerve
stimulation: a comparison between mono-phasic and bi-phasic waveforms"
International Journal of Bioelectromagnetism Vol. 4, No. 2, 2002,
pg 195

58. Abu-El-Magd, M.A.; Hamoud, G.A.; Findlay, R.D., " Application
of the Value-Based Approach to the Planning of Customer Delivery
Systems," Power Systems, IEEE Transactions on ,Volume: 19
, Issue: 4 , Nov. 2004, Pages:2086 - 2092

59. del Perugia, C.; Findlay, R.D.; Stranges, N., "Skin Effect
Factor in the Bar Extension of Large Two-Pole Induction Motors
by Three-Dimensional Finite-Element Simulations," IEEE Transactions
on Magnetics, Volume 42, Issue 10, Oct. 2006 Page(s):3404 -
3406

60. Fang Liu and R.D.Findlay, "Investigation of mechanical
properties of single layer ACSR based on an Integrated Model,"
Elsevier, Electric Power Systems Research, Vol. 78, Feb., 2008,
pp 209-216.

61. M.S. Al-Saud, M.A. El-Kady and R.D. Findlay, "A new approach
to underground cable performance assessment," Electric Power
System Research, 78, pp. 907– 918, June 2007.

62. M.S. Al-Saud, M.A. El-Kady and R.D. Findlay, "Combined
simulation-experimental approach to power cable thermal loading
assessment," IET Proceedings-Generation, Transmission and
Distribution Vol. 2, pp.13-21, January 2008.

**Conference Publications:**

1. R.D. Findlay and P.P. Biringer, "Current and Loss Distribution
in Solenoids", Proceedings, IEEE Biennial Heating Conference,
Cleveland, OH, September, 1965.

2. R.D. Findlay and G. Pandurangan, "A Comparison between
Two Different Designs of Bare Single-Layer Steel Reinforced Aluminum
Conductor", Refereed Paper, No. 70, T.P.-88-PWR, IEEE Winter
Power Meeting, January 25-30, 1970, New York.

3. R.D. Findlay and H. Riaz, "An Analysis of the Jervis Crossing
AACSR Conductor", Paper No. C72-191-0; IEEE Winter Power
Meeting, January 30-February 4, 1972, New York, 7 pages.

4. R.D. Findlay and H.A. Briggs, "Open Circuit Tooth Ripple
Eddy Current Loss in Smooth Laminated Poles", Paper No. T73-303-5,
IEEE Summer Power Meeting, July 15-20, 1973, Vancouver, B.C.

5. H.A. Briggs and R.D. Findlay, "Tooth Ripple Losses",
Machinery Development Symposium, Schenectady, New York, October
3 & 4, 1973.

6. R.D. Findlay, "Analysis of Two Layer Aluminum Conductor
Steel Reinforced", Paper No. C73-172-4, IEEE Winter Power
Meeting, January 28-February 2, 1973, New York, 7 pages.

7. R.D. Findlay and D.T. Jones, "New Analysis and Measurement
Techniques for Reinforced Conductors", Biannual Pan-American
Congress of Mechanical and Electrical Engineering and its Allied
Branches, August 12-18, 1973, Bogota, Columbia, SA, 17 pages.

8. H. Riaz and R.D. Findlay, "On the Numerical Solution of
a Coupled Nonlinear Parabolic System", Proc. Fifth Canadian
Congress on Applied Mechanics, University of New Brunswick, May
26-30, 1975, pp. 672-2.

9. R.D. Findlay and D.T. Jones, "Modelling Techniques for
Single Layer Conductors with Steel Reinforcing", Proc. IEEE
Power Eng. Society Summer Meeting, Portland, OR, Paper A76-434-1,
July, 1976, 7 pages.

10. H. Riaz and R.D. Findlay, "A Field Theoretical Model
for ACSR", Proc. Can. Com. & PWR Conference, Montreal,
Paper 76 Ch 1126-2, October 20-22, 1976, pp. 432-5.

11. H. Riaz and R.D. Findlay, "A Nonlinear Diffusion Model
for the Electromagnetic Fields Problem", Proceedings, Simulation
'77, Montreaux, Switzerland, June 22-24, 1977, pp. 241-4.

12. R.D. Findlay, H. Riaz, "A Nonlinear Diffusion Model for
the Electromagnetic Field Configuration of Single Layer ACSR,
Paper A78-152-1, Winter Power Meeting, IEEE, January 29-February
3, 1978.

13. R.D. Findlay, A.K. Bansal, "Economics of ACSR Conductor",
IEEE Communications and Power Conference, October 18-20, 1978,
Montreal, pp. 176-9.

14. V. Subba Rao, R.E. Burridge and R.D. Findlay, "Mathematical
Models of Synchronous Machines for Dynamic Studies", IEEE
Winter Power Meeting, New York, February 4-9, 1979, Paper No.
A79 011-8.

15. R.D. Findlay, "Some Notes on Tooth Ripple Losses",
Paper 3B2, Fifteenth Universities Power Engineering Conference,
University of Leicester, U.K., March 25-27, 1980, 11 pp.

16. R.D. Findlay and L. Collette, "Stray Voltages on Dairy
Farm: No Simple Solution", Proc. AIC Conference, St. Catharines,
Ont., August, 1981.

17. R.D. Findlay and V. Subba Rao, "Losses in Highly Nonlinear
Ferromagnetic Media Subjected to Alternating Magnetization",
Proc. MELECON '83, Vol. 1, Greece, May 24-26, 1983, IEEE Paper
No. 83CH 1913-3, B.09.

18. R.D. Findlay, "Ripple Losses in Smooth Laminated Poles",
Proc. MELECON '83, Vol II, Greece, May 24-26, 1983, IEEE Paper
83CH 1913-3, D6.13.

19. R.D. Findlay and R. Murray, "Application of the Finite
Element, Finite Difference Technique to the Solution of Multistrand
Conductor Problems", COMPUMAG, Italy, May 30 - June 2, 1983,
Digest, pp. 130-134.

20. M.J.L. McLean and R.D. Findlay, "A Digital Device for
the Measurement of Angular Velocity and Torque Angle for the Analysis
and Control of an Electric Machine", Proc. IEEC, Toronto,
September, 1983, Paper 83102, pp. 482-485.

20. R.D. Findlay and R. Murray, "A Hybrid Finite Element,
Finite Difference Technique Applicable to the Solution of Linear
Conductor Problems", Proc. IEEC, Toronto, September, 1983,
Paper 83100, pp. 678-681.

21. J.H. Dableh and R.D. Findlay, "An Annotated Summary of
Analysis and Design Techniques for Pipe-type Cable Systems",
IEEE Winter Power Meeting, Dallas, TX, January, 1984.

22. J.H. Dableh, M.A. El-Kady, M. Elnaga and R.D. Findlay, "An
Efficient Algorithm for Sensitivity Analysis of Large Scale Radial
Networks", Proc. Int. Symposium on Circuits and Systems,
Montreal, Canada, May 7-10, 1984.

23. A.A. Jimoh, R.D. Findlay and M. Poloujadoff, "Stray Losses
in Induction Machines: Part I - Definition, Origin and Measurement",
IEEE Summer Power Meeting, Seattle, WA, July 15-20, 1984, Paper
No. 845M668-0.

24. A.A. Jimoh, R.D. Findlay and M. Poloujadoff, "Stray Losses
in Induction Machines: Part II - Calculation and Origin",
IEEE Summer Power Meeting, Seattle, WA, July 15-20, 1984, Paper
No. 845M669-8.

25. J.H. Dableh, R.D. Findlay, I.L. Colquhoun and M.E. Truemner,
"Cable for High Pulse Power Applications", IEEE Winter
Power Meeting, New York, NY, February 3-7, 1985, Paper 85 WM 005-4.

26. A. Bolopion, M. Poloujadoff, R.D. Findlay, "Models for
Balanced Voltage Operation of Linear Induction Motors", IEEE
Winter Power Meeting, New, NT, February 3-7, 1985, Paper No.
85 WM 131-8.

27. J.H. Dableh, R.D. Findlay, N.T. Nicholson and N.T. Olson,
"Experience with High Pulse Power Systems for Remote Repositioning
of Concentric Coolant Tube Spacers", Proc. Jordan International
Electrical and Electronic Engineering Conference, Amman, Jordan,
April 28 - May, 1985, pp. 127-131.

28. J.S. Barrett, C.J. Fehervari, O. Nigel and R.D. Findlay, "A
New Model of AC Resistance in ACSR Conductors", IEEE Summer
Power Meeting, Vancouver, B.C. July 14-19, 1985, Paper No. 85
SM 404-9.

29. I. El-Nahas, B. Szabados, R.D. Findlay, M. Poloujadoff, S.
Lee, P. Burke and D. Perco, "Three Dimensional Flux Calculation
on a Three Phase Transformer", IEEE Summer Power Meeting,
Vancouver, B.C., July 14-19, 1985, Paper No. 85 SM 378-5.

30. J.H. Dableh, R.D. Findlay and G.S. Klempner, "Design
and Development of Compact, Durable Electromagnetic Pulse Power
Coils for Repositioning Coolant Tube Spacers in Candu Nuclear
Reactors", to IEEE Winter Power Meeting, New York, February
2-7, 1986, Paper No. 86 WM 007-9.

31. M. Poloujadoff and R.D. Findlay, "A Procedure for Illustrating
the Effect of Variation of Parameters on Optimal Transformer Design",
IEEE Winter Power Meeting, New York, February 2-7, 1986, Paper
No. 86 WM 014-5.

32. E. Tarasiewicz, R.D. Findlay and J.H. Dableh, "Finite
Element Approach to the Solution of Axisymmetric Vector Field
Problems", Intermag, Phoenix, AZ, April 14-17, 1986, Paper
No. G 13 11.

33. R.D.Findlay, "Development of an Integrated Program in
Electrical Engineering, Computer Engineering and Management,"
proceedings Fifth Canadian Conference on Engineering Education,
Vol. I, pp221-234, London, Ontario, 12 & 13th May, 1986.

34. E. Tarasiewicz, R.D. Findlay and J.H. Dableh, "Accurate
Computation of Axisymmetric Vector Potential Fields with the Finite
Element Method", IEEE Summer Power Meeting, Mexico City,
Mexico, July 1986.

35. B. Szabados, I. El-Nahas, M. El-Sobki, R.D. Findlay and M.
Poloujadoff, "A New Approach to Determine Eddy Current Losses
In The Tank Walls of a Power Transformer," IEEE Summer Power
Meeting, Mexico City, Mexico, July 1986.

36. M.A. El-Kady, M.M. Abu-Elnaga, R.D. Findlay and C.G. Bailey,
"Sparse Formulation of the Direct Method of Transient Stability
for Applications on Microcomputers", Proc. Twenty-Ninth Symposium
on Circuits and Systems, Lincoln, Nebraska, 1986.

37. R.D. Findlay, A.A. Jimoh and B. Szabados, "Development
of Parasitic Torques Leading to Shaft Vibrations in Induction
Motors", NATO-sponsored Seminar on Vibrations and Noise in
Alternating Current Machinery, Leuven, Belgium August 4-8, 1986.
Also for publication as a chapter in book, Pub. Martinus Nijhoff.
(Invited paper)

38. A.A. Jimoh and R.D. Findlay, "Parasitic Torques in Saturated
Induction Motors", IEEE Winter Power Meeting, New Orleans,
Feb., 1987, Paper No. 87WM202-5 (See Item Journal Pub. No. 25).

39. S. Spencer, B. Szabados, I. El-Nahas, M.S. El-Sobki and R.D.
Findlay, "The Interactive Graphics Module for Prediction
of Eddy Current Losses in the Tank Walls of a Power Transformer",
IEEE Power Industry Computer Applications Conference, Montreal,
Canada, May 4-7, 1987.

40. R.D. Findlay and J.H. Dableh, "Summary of Theoretical
and Experimental Development of a Novel Electromagnetic Technique
for Remote Repositioning of Coolant Tube Spacers in CANDU Nuclear
Reactors, IEEE Summer Power Meeting, San Francisco, July 12-17,
1987, Paper No. 87SM401-3.

41. R.D. Findlay, B. Szabados, I. El-Nahas, M.S. El-Sobki, and
M. Poloujadoff, "Application of the Harmonic Analysis Technique
to Determining Current in Conducting Plates", Proc. Int.
Symp. on Electromagnetic Fields, 22-26 Sept., 1987, Pavia, Italy,
pp. 265-270.

42. R.D. Findlay and J.H. Dableh, "Electromagnetic Repositioning
of Spacers in a CANDU Reactor", Proc. Int. Symp. on Electromagnetic
Fields, 22-26 Sept., 1987, Pavia, Italy, pp. 271-4.

43. M.M. Abu-Elnaga, M.A. El-Kady and R.D. Findlay, "Sparse
Formulation of the Transient Energy Function Method for Applications
to Large-Scale Power Systems", IEEE Winter Power Meeting,
New York, Jan. 31 - Feb. 5, 1988, Paper No. 88WM140-6.

44. M.M. Abu-Elnaga, M.A. El-Kady and R.D. Findlay, "Stability
Assessment of Highly Stressed Power Systems Using the Sparse Formulation
of the Direct Method", IEEE Winter Power Meeting, New York,
Jan. 31 - Feb. 6, 1988, Paper No. 88WM141-4.

45. C.S. Esendal and R.D. Findlay, "A Review of the Composite Dielectric Insulated Underground Transmission Cable", Second International Conference on Properties and Applications of Dielectric Materials, Beijing China, Sept., 1988.

46. R.D. Findlay and V.T. Morgan, "Effect of Frequency
on the Resistance and Reactance of Bare Steel-Cored Aluminum Conductors",
Proceedings Canadian Conference on Electrical and Computer Engineering,
Nov. 3-4, 1988, Vancouver, Paper No. 33-1, pp. 611-615.

47. M.S. El-Sobki, I. El-Nahas, B. Szabados, R.D. Findlay, S.
Spencer, M. Anderson, "Interactive Graphics Module and the
Automatic Mesh Generation for Two and Three Dimensional Magnetic
Field Analysis", Proceedings Middle East Power Conference,
Volume 1, Paper No. CA04-042, pp. 219-224, Cairo, 9-13 Jan., 1989.

48. S. Spencer, B. Szabados, I. El-Nahas, M.S. El-Sobki, R.D.
Findlay, "Interactive Graphics Module for Prediction of Eddy
Current Losses in the Tank Walls of a Power Transformer",
Proceedings Middle East Power Conference, Volume 1, Paper No.
CA05-043, pp. 225-231, Cairo, 9-13 Jan., 1989.

49. J.H. Dableh, R.D. Findlay, R.T.H. Alden and B. Szabados, "A
Novel Electromagnetic Field Shaper for Pipe Type Cable Systems",
IEEE Summer Power Meeting, Long Beach, CA, July 9-14, 1989.

50. J.H. Dableh, R.D. Findlay and B. Szabados, "Finite Element
Predictions of Transient Electromagnetic Forces in Axisymmetric
Geometries", ISEF-89, Lodz, Poland, Sept. 20-22, 1989. (See
books, item 8.)

51. B. Szabados, J.H. Dableh, R.D. Findlay and D. Stafford, "A
New Approach for the Measurement of the Torque-Speed Characteristics
of Induction Motors", Proc. IEE Fourth International Conference
on Electrical Machines and Drives, London, England, pp. 246-250,
13-15 Sept., 1989.

52. R. Belmans, D. Verdyck, W. Geysen and R.D. Findlay, "Electro-Mechanical
Analysis of the Audible Noise of an Inverter-Fed Squirrel-Cage
Induction Motor", IEEE-IAS, Paper No. LM/D-89-41065, IAS
Annual Meeting, San Diego, CA, Oct. 1-5, 1989, 6 pp.

53. B. Szabados, J.H. Dableh, R.D. Findlay, G.M. Obermeyer and
R.E. Draper, "Measurement of the Torque-Speed Characteristics
of Induction Motors Using a New Digital Approach", Paper
No. 90 WM 27-MT09, IEEE Winter Power Meeting, Atlanta, Georgia,
Feb. 4-9, 1990.

54. R.D. Findlay, R. Belmans and D. Mayo, "Influence of the
Stacking Method on the Iron Losses in Power Transformer Cores",
Paper No. DP-01, INTERMAG Conference Brighton, UK, 17-20, April,
1990.

55. R.Belmans, R.D.Findlay and W.Geysen, "A Circuit Approach
to Finite Element Analysis of a Double Squirrel Cage Induction
Motor," Paper No. 90 SM 287-3 EC, IEEE Summer Power Meeting,
Minneapolis, Minn., July 15-19, 1990.

56. V.T. Morgan and R.D. Findlay, "The Effect of Frequency
on the Resistance and Internal Inductance of Bare ACSR Conductors",
Paper No. 90 SM 360-8PWRD, IEEE Summer Power Meeting, July 15-20,
1990, Minneapolis, Minnesota. (Publication: IEEE Trans. on Power
Delivery.)

57. R. Belmans, D. Verdyck, T.B. Johansson, W. Geysen, and R.D.
Findlay, "Calculation of the No-Load and the Torque-Speed
Characteristic of Induction Motors Using Finite Elements",
Paper No. ICEM 90-130, Proc. International Conference on Electric
Machines, Cambridge, Massachusetts, August 12-15, 1990, pp. 724-729.

58. R. Belmans, R.D. Findlay, E. Freeman, D. Verdyck and W. Geysen,
"CAE-Analysis Tools for Electric Machine Design", ELECTROSOFT,
21-23 August, 1990, Boston. (See item 9 in Books.)

59. R. Belmans, R.D. Findlay, D. Verdyck and W. Geysen, "Micromotors:
An Approach to Design", Proceedings Canadian Conference on
Electrical and Computer Engineering, pp. 65.2.1-65.2.4, Vol. 2,
Ottawa, Sept. 4-6, 1990.

60. R. Belmans, D. Verdyck, P. Houtave, W. Geysen and R.D. Findlay,
"Inductance Calculation and Torque Estimation of Permanent
Magnet Motors Using Finite Elements", Electrical Drive Symposium,
Capri, Italy, 25-28 Sept., 1990, 6 pp.

61. R. Belmans, D. Verdyck, W. Geysen and R.D. Findlay, "Modelling
of the Magnetization of Permanent Magnet Machines Using Finite
Elements", 6th Conference on Power Electronics and Motion
Control, PEMC'90, 1-3 Oct., Budapest, Hungary, 1990.

62. R. Belmans, Ph.K. Sattler, R.D. Findlay, B. Szabados and W.
Geysen, "Influence of the Supply Harmonics on Audible Noise
of Induction Motors", Proc. International Conference on Harmonics
in Power Systems (IV), Budapest, Hungary, 4-6 Oct., 1990, pp.
298-303.

63. R. Belmans, W. Geysen, Ph.K. Sattler and R.D. Findlay, "Comparison
of the Audible Noise Emitted by Inverter-Motor Combinations",
IEEE-IAS Paper No. 90-41033, Proc. IAS Annual Meeting, Seattle,
WA, 7-12 Oct., 1990, pp. 109-115.

64. R. Belmans, Ph.-K. Sattler, R.D. Findlay and W. Geysen, "Electromechanical
Analysis of the Audible Noise Emitted by Induction Motors Fed
by Different Variable Frequency Supplies", 11. Internationale
Fachtagung, Industrielle Automatisierung-Automatisierte Antriebe,
Technische Univesität Karl-Marx-Stadt, Deutsche Demokratische
Republik, 12-14 Feb., 1991. (Plenary Paper No. 4), 6 pages.

65. R.Belmans, W.Geysen, R.D.Findlay, B.Szabados, S.Spencer, S.Lie,
"Magnetic Field Analysis in Squirrel Cage Motors," Paper
No.PC10, COMPUMAG, The 8th Conference on the Computation of Electromagnetic
Fields, Sorrento, Italy, July 7-11, 1991.

66. D.K.MacKay and R.D.Findlay, "An Examination of the Scaling
Properties of Electric Micromotors and their Magnetic Duals,"
Proc. IEE 5th International Conference on Electrical Machines
and Drives, London, U.K., 11-13 Sept., pp170-174, 1991.

67. S.Spencer, B.Szabados, R.Findlay, M.Poloujadoff, R.Belmans
and S.Lie, "An Industrial Approach to CAD of Squirrel Cage
Induction Motors," China International Conference on Electrical
Machines, Wuhan, China, Sept., 18-20, 1991, Paper No. F-19, pp21-4.

68. V.T.Morgan and R.D.Findlay, "Effects of Axial Tension
and Reduced Air Pressure on the Radial Thermal Conductivity of
a Stranded Conductor," IEEE PES Winter Power Meeting, New
York, 26-30 Jan., 1992, Paper No. 92 WM 314-5-PWRD, 6 pages.

69. R.D.Findlay, B.Szabados, S.Lie, S.Spencer, R.Belmans and M.Poloujadoff,
"Placement of Vents to Reduce Shaft Flux in Two Pole Induction
Motors, with a Comment on Heating Effects," IEEE Winter Power
Meeting, New York, 26-30 Jan., 1992, Paper No. 92 WM 054--7-EC,
7 pages.

70. R.D.Findlay, N.Stranges and R.Belmans, "Tank Wall Shielding:
Effects of Positioning and Variegation of the Shields," International
Workshop on Electric and Magnetic Fields, Liege, Belgium, 28-30,
Sept., 1992, Paper #102, 6 pages.

71. R.D.Findlay, B.Szabados, S.Lie and M.A.Rahman, "Heating
Effects Due to Placement of Vents in Two Pole Induction Motors,"
Proceedings Nefoundland Electrical and Computer Engineering Conference,
Memorial University, St. Johns, Nfld., April 30, 1993, pp11-15.

72. J.H. Dableh, R.D. Findlay, B.Szabados, R.Belmans, and S.Lie,
"Investigation of the Air Gap Influence on the Performance
and Cost Optimization of a Squirrel Cage Induction Motor,"
IEE Sixth International Conference on Electrical Machines and
Drives, Oxford, England, 8-10 Sept., 1993

73. N.Stranges, K.Mackay, R.D.Findlay, "Iron Losses in ac
Machines Due to Rotational Flux Conditions," Canadian Conference
on Electrical and Computer Engineering, Vancouver, BC, Paper No.
148, Sept. 14-17, 1993 p1049-1052.

74. J.H.Dableh and R.D.Findlay, "A Study of Eddy Current
Losses in Pipe-Type Cable Systems," Canadian Conference on
Electrical and Computer Engineering, Vancouver, BC, Paper No.
306, Sept. 14-17, 1993, p794-7.

75. R.D.Findlay, N.Stranges and D.K.MacKay, "Losses due to
Rotational Flux in Three Phase Induction Motors," IEEE Winter
Power Meeting, New York, 30 Jan. -4 Feb., 1994, Paper no. 94 WM
115-6 EC

76. IEEE Subcommittee on Power Engineering Curricula, " Electric
Power Engineering Curricula Content in the 21st Century,"
Working Group Paper for Winter Power Meeting, 30 Jan.-4 Feb.,
New York, Paper No. 94 WM 113-1 PWRS.

77. J.Brandolino and R.D.Findlay, "Practical Measurement
of Symmetrical Component Currents in Induction Motors," Canadian
Conference on Electrical and Computer Engineering, Halifax, NS,
Sept. 25-28, 1994, pp 26-9.

78. V.T.Morgan, R.D.Findlay and Bo Zhang, "Distribution of
Current Density in ACSR Conductors," Canadian Conference
on Electrical and Computer Engineering, Halifax, NS, Sept. 25-28,
1994, pp 165-8.

79. V.T. Morgan, and R.D.Findlay, "A Unified Model for Predicting
the Electrical, Mechanical and Thermal Characteristics of Stranded
Overhead-Line Conductors," Canadian Conference on Electrical
and Computer Engineering, Halifax, NS, Sept. 25-28, 1994, pp 182-5.

80. R.D.Findlay and N.Stranges, "Importance of Rotational
Iron Loss Data for Accurate Prediction of Rotating Machine Core
Loss," Proceedings Industry Applications Sociey Annual Meeting,
Denver, Oct.. 2-6, 1994, pp 123-7.

81. R.D.Findlay, N.Stranges and D.K.MacKay, "Losses due to
Rotational Flux in Three Phase Induction Motors," Second
International Workshop on Electric and Magnetic Fields, Leuven,
Belgium, 17-20 May, 1994, 6 pages.

82. R.D.Findlay and J.H.Dableh, "Reduction of Eddy Current
Losses in Pipe-Type Cable Systems," Second International
Workshop on Electric and Magnetic Fields, Leuven, Belgium, 17-20
May, 1994, 6 pages.

83. J.H.Dymond and R.D.Findlay, "Some Commentary on the Choice
of Rotor Bar Material for Induction Motors," IEEE Winter
Power Meeting, 29 Jan.-2 Feb., 1995, New York, Paper no. 95 WM
064-6 EC, 6 pages.

84. V.T.Morgan, Bo Zhang and R.D.Findlay, "Effects of Temperature
and Tensile Stress on the Magnetic Properties of a Steel Core
from an ACSR Conductor," IEEE Winter Power Meeting, Baltimore,
January 21-5, 1996. (See IEEE Trans. Power Delivery)

85. V.T.Morgan, Bo Zhang and R.D.Findlay, "Effect of Magnetic
Induction in a Steel-Cored Conductor on Current Distribution,
resistance and Power Loss," IEEE Summer Power Meeting, Baltimore,
27-31 July 1997 (Also accepted for publication in IEEE Trans.
Power Delivery)

86. R.D.Findlay and B.Szabados, "Prediction of Zero Sequence
Currents in Some Induction Motor Designs, with the Aid of a Hybrid/Finite
Element Model," 6-9 1996, May International Conference on
Electric and Magnetic Fields, Liege, Belgium, pp447-451.

87. V.T.Morgan, B.Zhang and R.D.Findlay, "Effect of Magnetic
Induction in Steel-cored Conductors, on Current Distribution and
Power Loss," 6-9 May 1996, International Conference on Electric
and Magnetic Fields, Liege, Belgium, p 447-452.

88. Nick Stranges, Raymond D. Findlay and James H. Dymond, A Comparison
of Two Finite Element methods for Determining Flux Density Polarization
in Induction Motor Cores, Proc. Canadian Conference on Electrical
and Computer Engineering, Calgary, 26-29 May 1996, pp 943-6.

89. R.D.Findlay, "Rotational Magnetic Flux in Three Phase
Induction Motors, and its effect on Power Losses," invited
paper: 13 -15 May, 15th Annual Conference on Properties and Applications
of Magnetic Materials, Illinois Institute of Technology, Chicago,.

90. Raymond Ong, J.H.Dymond and R.D.Findlay, "A Comparison
of Techniques for Measurement of Shaft Currents in Rotating Machines,"
IEEE Winter Power Meeting, New York, February 2-6, 1997, Paper
#PE-557-EC-0-01-1997.

91. V.T.Morgan, V.Filipovic-Gledja and R.D.Findlay, "Variation
of the Electrical, Mechanical and Thermal Properties of an ACSR
Conductor During its Lifetime," ICEE'97, The International
Conference on Electrical Engineering, 29 July - 1 August, Matsue,
Japan.

92. Raymond Ong, J.H.Dymond, R.D.Findlay and B.Szabados, "Shaft
Current Measurement of a Large Induction Motor Using the Rogowski
Coil Method," Proc. IEEE-SDEMPED ‘97 (International
Symposium on Diagnostics for Electrical Machines, Power Electronics
and Drives, Carry-le-Rouet, France, Sept. 1-3, 1997, pp 23-26.)

93. Raymond Ong, J.H.Dymond, R.D.Findlay, B.Szabados, "Shaft
Current Phenomenon: Experimental Testing and Analysis of a Large
Induction Motor," Proc. International Association of Science
and Technology for Development, International Conference on High
Technology in the Power industry, Oct., 27-30, 1997, Orlando,
Florida, Paper 262-025, pp 241-6.

94. Raymond D. Findlay and Nick Stranges, "Measurement of
Iron Losses Under 2D Flux Conditions for Accurate Determination
of Stator Losses," The Global Market and Technical Outlook
for Soft Magnetic Materials ‘98, Barcelona, Spain, 20-22
April, 1998.

95. R.D.Findlay, R.Ong and J.H.Dymond, "Some Aspects of Shaft
Currents in Large Machines," Proc. 4th Int. Workshop on Electric
and Magnetic Fields, Marseille, France, 12-15 May, 1998, pp 27-32.

96. R.D.Findlay, D.Brocilo and V.T.Morgan, Some Experiences with
COOLTEMP, "An Analysis and Prediction Program for Aluminum
Conductor, Steel Reinforced," Proc. 4th Int. Workshop on
Electric and Magnetic Fields, Marseille, France, 12-15 May, 1998,
pp 93-98.

97. Nafia Al-Mutawaly and Raymond D. Findlay, "A Novel Coil
Design for Magnetic Nerve Stimulation," Canadian Conference
on Electrical and Computer Engineering, Waterloo, Canada, 24-28
May, 1998.

98. R.D.Findlay, V.T.Morgan and D.Brocilo, "Sensitivity Analysis
of Acsr Conductor Using Historical permeability Data from a Single
Wire versus Stranded Steel Core Permeability Data," Canadian
Conference on Electrical and Computer Engineering, Waterloo, Canada,
24-28 May, 1998, pp 906-9.

99. R.Ong, J.H.Dymond, J.V.Kay, R.D.Findlay and B.Szabados, "Impact
of Oil Lubrication on the Magnitude of Shaft Current in a Large
Oil Ring Lubricated Induction Machine," International Conference
on Electric Machines (ICEM'98), Istanbul, Turkey, 2-4 September,
1998.

100. R.Ong, J.H.Dymond, R.D.Findlay and B.Szabados, "Significance
of Joints Due to Lamination Segmentation on Shaft Currents in
Induction Machines," Accepted for Presentation at IEEE International
Conference on Electric Machines and Drives, 1999, Seattle, Washington.

101. R.Ong, J.H.Dymond, R.D.Findlay and B.Szabados, "Systematic
Practical Approach to the Study of Bearing Damage in Large Oil
Ring Lubricated Induction Machines," Accepted for Publication
at IEEE Petroleum and Chemical Industry Conference 1999, San Diego,
California.

102. Nick Stranges and Raymond D.Findlay, "Methods of Predicting
Rotational Flux Distributions in Three Phase Induction Motor Stators,"
IEEE Intermag 2000, Toronto, April 9-13, 2000, Paper #FD-10,
digest p 211.

103. Nick Stranges and Raymond D.Findlay, "Measurement of
Rotational Iron Losses in Electrical Sheet," IEEE Intermag
2000, Toronto, April 9-13, 2000, Paper #CD-02, digest pp431.

104. K.MacKay and R.D.Findlay, "A Comparison Between the
Tubes and Slices Method and a Finite Element Solution to a Micro
Motor Problem," 5th International Symposium on Electric and
Magnetic Fields, Ghent, Belgium, 17-19 May, 2000, Paper #11.

105. R.D.Findlay and Nick Stranges, "Predicting Rotational
Flux Distributions in Three Phase Induction Motor Stators,"
IEEE Canadian Conference on Electrical and Computer Engineering,
Halifax, Canada, 7-10 May 2000.

106. Raymond Ong, J.H.Dymond, Raymond D.Findlay and Barna Szabados,
"Shaft Current in AC Induction Machines - an On-Line Monitoring
System and Prediction Rules,"Proc. IAS Conference 2000, pp2822-2829.

107. Raymond Ong, J.H.Dymond and Raymond Findlay, "Stray
Load Loss Test Methods in Induction Machines: Challenges to Manufacturers,"
International Conference on Electrical Machines, Espoo, Finland,
28-30 August, 2000.

108. D.Brocilo, J.S.Chang and R.D.Findlay, "Modeling of Electrode
Geometry Effects on Dust Collection Efficiency of Wire-Plate Electrostatic
Precipitators," Proceedings, International Conference on
Electrostatic Precipitators (ICESP VIII), Volume 1, Paper A4-3,
Birmingham, Alabama, 14-17 May, 2001.

109. Susan Derrah, Raymond D. Findlay and Raymond Ong, "A
Statistical Procedure for Analyzing Stray Losses in Induction
Motors from Measurement," IEEE Instrumentation and Measurement
Technology Conference, Budapest, Hungary, 21-23 May 2001, Volume
3, Page(s): 1801 -1806.

110. T.Misaka, A.Akasaka, T.Oura, K.Urashima, D. Brocilo, R.D.Findlay
and Jen-Shih Chang, "Validation of MESP Code for Moving Electrode
Electrostatic Precipitators with and without First Field Pulse
Energization," Proceedings Fourth International Conference
on Applied Electrostatics, Oct. 5-9, 2001, Dalian, PR China, Dalian
University of Technology Press ISBN 7-5611-1912-7/TM.8

111. D.Brocilo, J-S. Chang, R.D. Findlay, Y. Kawada and T. Ito,
"Modelling of the Effect of Electrode Geometries on the Corona
Discharge Current-Voltage Characteristic for Wire-Plate Electrostatic
Precipitators," 2001 Annual Report: Conference on Electrical
Insulation and Dielectric Phenomena," Kitchener, Ontario,
Canada, Oct. 14-17, 2001(IEEE 0-7803-7053-8/1, IEEE Dielectrics
and Insulation Society) pp 681-4.

112. Nafia Al-Mutawaly, Hubert de Bruin and Raymond D. Findlay,
"Magnetic Nerve Stimulation: Field Focality and Depth of
Penetration," 2001 Annual International Conference of the
IEEE EMBS, pp877-880, Vol. I, 25-28 Oct., 2001, Istanbul, Turkey

113. D.Brocilo, J.S.Chang and R.D.Findlay, "Modelling of
Two-Stage Electrostatic Precipitators for Fine Particle Removal,"
Proceedings European Aerosol Conference, September 3-7, 2001,
Leipzig, Germany (See Journal of Aerosol Science, Vol. 32, Supplement
1, September 2001, pp S893-4, Pergamon Press, ISSN 0021-8502)

114. T.Misaka, T.Oura, D.Brocilo, K.Urashima, R.D.Findlay, J.S.Chang,
"Precipitations of High Resistivity Dust Particles of Steel
Sintering Plant by Hybrid Electrostatic Precipitator with Pulse
Corona and Moving Electrode," 6th International Aerosol Conference,
8-13 Sept 2002, Taipei, Taiwan.

115. D.Brocilo, J.S.Chang and R.D.Findlay, "The Numerical
Separation of Multi-Field, Wire-Plate Electrostatic Precipitators,"
Electrostatics 2003, 23-27 March 2003, Organised by the Electrostatics
Group of The Institute of Physics, Part of The Physics Congress,
Heriot-Watt University, Edinburgh

116. Mohamed Abul-Magd, and R.D.Findlay, "A New Approach
Using Artificial Neural Network and Time Series Models for Electrical
Daily Peak Load," Paper number: 79, IEEE Canadian Conference
on Electrical and Computer Engineering, Montreal, May, 2003

117. Mohamed Abul-Magd, and R.D.Findlay, "Application of
the Value-Based Approach to the Planning of Customer Delivery
Systems," Paper number: 78, IEEE Canadian Conference on
Electrical and Computer Engineering, Montreal, May, 2003

118. Mohamed Abul-Magd, Amir Shalaby, and R.D.Findlay, "The
Electricity Industry is changing worldwide: What is the relevance
of experience to date for Developing Countries?" Paper number:
77, IEEE Canadian Conference on Electrical and Computer Engineering,
Montreal, 4-7 May, 2003

119. Abu-EI-Magd, M.A.; Hamoud, G.A.; Findlay, R.D, "Use
of probability methods for planning customer delivery systems,"
IEEE CCECE 2003, Volume: 1 , May 4-7, 2003, Page(s): 339 -342

120. D.B.Brocilo, J.S.Chang and R.D.Findlay, "Light Emission
from the Surface of Spike-Type Discharge Electrode at Negative
Corona Discharge in a Non-Thermal Plasma Reactor," International
Conference on Plasma Science, June 2-5, 2003, Jeju, Korea.

121. M.A. Abul-Magd, G.A. Hamoud and R.D. Findlay, "Application
of the Value-Based Approach to the Planning of Customer Delivery
Systems," IEEE Power Engineering Society Annual General Meeting,
July 13-17, 2003, Toronto, Canada

122. D.Brocilo, J.S.Chang and R.D.Findlay, "Numerical Validation
of Collection Efficiencies of Spike-Plate and Wire-Plate Single-Field
Electrostatic Precipitators," European Aerosol Conference
2003, Madrid, Spain, 31 August - 5 September, 2003.

123. D.Brocilo, J.S.Chang and R.D.Findlay, "Experimental
Validation of Large-Scale Wire-Plate Type ESP," European
Aerosol Conference 2003, Madrid, Spain, 31 August - 5 September,
2003.

124. D.Brocilo, J.S.Chang, R.D.Findlay and K.Urashima, "Characteristics
of Bottom Ash and Aerosol Particle Compositions Generated by Burning
Incense," European Aerosol Conference 2003, Madrid, Spain,
31 August - 5 September, 2003.

125. D.Brocilo, J.S.Chang and R.D.Findlay, "Numerical and
Experimental Studies of Spike-Plate and Wire-Plate Electrostatic
Precipitators for Collection of Submicron Particles," European
Aerosol Conference 2003, Madrid, Spain, 31 August - 5 September,
2003.

126. Fang Liu; Findlay, R.D.; Qiang Song, "Discussion and
Prediction of Mechanical Properties for Single Layer ACSR,"
Innovative Computing, Information and Control, 2006. ICICIC '06.,
First International Conference on Volume 1, 30-01 Aug. 2006 Page(s):138
- 141

127. Fang Liu; Findlay, R.D.; Qiang Song, "A Neural Network
Based Electrical Loss Prediction of Bare Overhead ACSR Conductors,"
Innovative Computing, Information and Control, 2006. ICICIC '06.
First International Conference on Volume 2, 30-01 Aug. 2006 Page(s):392
- 395

128. Findlay, R., Liu, F., "Experiments on Single Layer ACSR
Conductors," 12th Biennial IEEE Conference on Electromagnetic
Field Computation (CEFC) 2006, Miami, Florida USA April 30 –
May 3, 2006. PD 6 - 2, Page(s):306 - 306

129. del Perugia C., Findlay R.D. and Stranges N. "Calculation
of Starting Performance for Large Two Pole Induction Motors with
Comparison to Test Values", Canadian Conference on Electrical
and Computer Engineering, May 7-10, 2006, Ottawa, Canada.

130. del Perugia C., Findlay R.D. and Stranges N. "Skin Effect
Factor Along the Rotor Bar Extension of Squirrel Cage Induction
Motors", IEEE International Magnetics Conference, May 8-12,
2006, San Diego, USA.

131. del Perugia C., Findlay R.D. and Stranges N. "A Comparison
of 3D Models for Determining Skin Effect in Induction Motor End
Rings", International Conference on Electrical Machines,
September 2-5, 2006, Chania, Greece.

132. Raymond D. Findlay and Fang Liu, "Prediction of Ontario
Hourly Load Demands and Neural Network Modeling Techniques",
The 2006 IEEE Canadian Conference on Electrical and Computer Engineering
(CCECE 2006), Ottawa, Canada, May 7 – 10, 2006, pp 1164 –
1167

133. Fang Liu, Raymond D. Findlay and Qiang Song, "A Neural
Network Based Short Term Electric Load Forecasting in Ontario
Canada", The joint International Conference on Computational
Intelligence for Modeling, Control and Automation - CIMCA'2006
and International Agents, Web Technologies and Internet Commerce
– IAWTIC'2006, Sydney, Australia, November 28 – December
1, 2006.

134. Fang Liu, Qiang Song and Raymond D. Findlay, "Accurate
24-hour-ahead Load Forecasting Using Similar Hourly Loads ",
The joint International Conference on Computational Intelligence
for Modeling, Control and Automation - CIMCA'2006 and International
Agents, Web Technologies and Internet Commerce – IAWTIC'2006,
Sydney, Australia, November 28 – December 1, 2006.

135. Qiang Song, Fang Liu and Raymond D. Findlay, "Improved
Fuzzy Neural Network Control for a Pneumatic System Based on Extended
Kalman Filter", The joint International Conference on Computational
Intelligence for Modeling, Control and Automation - CIMCA'2006
and International Agents, Web Technologies and Internet Commerce
– IAWTIC'2006, Sydney, Australia, November 28 – December
1, 2006.

136. Qiang Song, Fang Liu and Raymond D. Findlay, "Generalized
Predictive Control for a Pneumatic System Based on an Optimized
ARMAX Model from Neural Network ", The joint International
Conference on Computational Intelligence for Modeling, Control
and Automation - CIMCA'2006 and International Agents, Web Technologies
and Internet Commerce – IAWTIC'2006, Sydney, Australia, November
28 – December 1, 2006.

137. M. S. Al-saud, M. A. El-Kady, and R.D. Findlay, "Accurate
Assessment of Thermal Field and Ampacity of Underground Power
Cables", CCECE06 Conference, Canada, May, 2006.

138. M. S. Al-saud, M. A. El-Kady, and R.D. Findlay, "Application
of finite-element sensitivities to power cable thermal field analysis",
IASTED International Conference on Power and Energy Systems (EuroPES
2006), Rhodes, Greece, June 26 -28, 2006, Paper # 521-126.

139. M. S. Al-saud, M. A. El-Kady, and R.D. Findlay, "Power
cable thermal field sensitivities using Finite-Elements",
IASTED International Conference on Power, Energy and Applications
(PEA 2006), September 11- 13, 2006, Gaborone, Botswana., Paper
# 506-059.

140. M. S. Al-saud, M. A. El-Kady, and R.D. Findlay, "Optimization
of power cable thermal performance using finite element-generated
gradient," Proc. Of Ninth IASTED International Conference
on Power and Energy Systems, Clearwater, Florida, USA, January
3-5, 2007, pp63-68.

141. D.Brocilo, J.Podlinski, J.S.Chang, J.Mizeraczyk, and R.D.Findlay,
Electrode geometry effects on the collection efficiency of submicron
and ultrafine dust particles in spike-plate electrostatic precipitators,
Electrostatics 2007, Oxford, England, 26-29 March 2007.

142. M. S. Al-saud, M. A. El-Kady, and R.D. Findlay, "Simulation
of finite-element sensitivities for power cables in complex media",
The 18th IASTED International Conference on Modelling and Simulation
(MS-2007), May 30 – June 1, 2007, Montreal, Quebec, Canada,
pp 84-89.

143. M. S. Al-saud, M. A. El-Kady, and R.D. Findlay, "Advanced
Thermal Field Sensitivity analysis of power cables", CCECE07
Conference, Vancouver, Canada, April 2007, pp 133-136

144. M. S. Al-saud, M. A. El-Kady, and R.D. Findlay, "Experimental
Investigation of Power Cable Performance", International
Conference on Power Engineering, Energy and Electrical Drives,
April 12-14, 2007, Setubal, Portugal, pp 595-599.

145. M. S. Al-saud, M. A. El-Kady, and R.D. Findlay, "A Novel
Finite-Element Optimization Algorithm with applications to Power
Cable Thermal Circuit Design ", IEEE Power Engineering Society,
2007 General Meeting, 24-28 June 2007, Tampa, Florida USA.

146. M.S. Al-Saud, M.A. El-Kady and R.D. Findlay, "A new
approach to underground cable performance assessment", Electric
Power Systems Research, Volume 78, Issue 5, May 2008, Pages 907-918.

147. M.S. Al-Saud, M.A. El-Kady and R.D. Findlay, "Combined
Simulation-Experimental Approach to Power Cable Thermal Loading
Assessment", IET Generation, Transmission & Distribution,
Vol. 2, No. 1, Paper # GTD-2007-0138, pp. 13-21, 2008.

148. M.S. Al-Saud, M.A. El-Kady, and R.D. Findlay (Canada), Simulation
of Finite-Element Sensitivities for Power Cables in Complex Media,
MOAS'07 Proceedings of the 18th IASTED International Conference:
modelling and simulation ACTA Press Anaheim, CA, USA